cat.8100v item performance characteristics 10 0.1 2- f 2.0 (pc board hole dimensions) (terminal dimensions) 4.0 0.5 2.5 1.5 +0.2 -0.1 0.8 +0.2 -0.1 polarity bar 10 l 2 f d +1max. 4.00.5 pressure relief vent 0.8 +0.2 -0.1 the other terminal is also available upon request. please refer page 237 for schematic of dimensions. 0.1 sleeve ( p.e.t. ) l 1 a 2 d 3 2 4 e 5 5 6 6 7 1 8 m 9 e 10 l 11 a 12 configuration case dia. code capacitance tolerance (20%) rated capacitance (560f) rated voltage (250v) series name type f d 22 25 30 35 code z 20 y a b c aluminum electrolytic capacitors ad series withstanding 3000 hours application of rated ripple current at 105 c. suited for 100v/200v switch-over use in switching power supplies. withstanding overvoltage and suited for iec-60950 application. adapted to the rohs directive (2002/95/ec). a drawing type numbering system (example : 250v 560 f) snap-in terminal type, withstanding overvoltage series dimensions v(code) d 250v (2e) 20 22 25 30 35 00 82 0 100 0 120 0 150 0 180 0 220 0 270 0 330 0 390 0 470 0 560 0 680 0 820 1000 1200 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 20 20 20 25 20 25 20 30 20 35 20 40 20 45 20 50 0.42 0.53 0.65 0.79 0.90 1.00 1.15 1.30 22 20 22 25 22 25 22 25 22 30 22 35 22 40 22 45 0.53 0.65 0.79 0.90 1.00 1.15 1.30 1.49 25 20 25 25 25 25 25 25 25 30 25 35 25 40 25 45 25 50 0.65 0.79 0.90 1.00 1.15 1.30 1.49 1.65 1.80 30 20 30 25 30 25 30 25 30 30 30 35 30 40 30 45 30 50 0.90 1.00 1.15 1.30 1.49 1.65 1.80 2.00 2.30 35 20 35 25 35 25 35 25 35 30 35 35 35 40 35 45 35 50 1.15 1.30 1.49 1.65 1.80 2.00 2.30 2.47 2.60 case size d l (mm) rated ripple (arms) at 105 c 120hz cap.(f) code frequency (hz) coefficient 50 60 120 300 1k 10k 50k~ 0.81 0.85 1.00 1.17 1.32 1.45 1.50 rated ripple category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tan stability at low temperature endurance shelf life withstand excess voltage marking not defective after 7 hours continuous charges of 360vdc at 70 c atmosphere. printed with white color letter on black sleeve. 40 ~ +105 c 250v 82 ~ 1200f 20% at 120hz, 20 c 0.15max. 120hz,20 c measurement frequency:120hz after storing the capacitors under no load at 105 c for 1000 hours, and after performing voltage treatment based on jis c 5101-4 clause 4.1 at 20 c, they will meet the requirements listed at right. within 20% of intial value 200% or less of intial spesified value initial specified value or less capacitance change tan leakage current i ( a) (after 5 minutes' application of rated voltage) [ c : rated capacitance ( f ) v : voltage ( v ) ] after an application of dc voltage (in the range of rated dc voltage even after over-lapping the specified ripple current)for 3000 hours at 105 c , capacitors meet the characteristic requirements listed at right. z 25 c/z+20 c z 40 c/z+20 c specifications within 15% of intial value 150% or less of intial spesified value initial specified value or less capacitance change tan leakage current rated voltage(v) impedance ratio zt/z20 (max.) 250 3 12 ad 3 cv gu with standard overvoltage frequency coefficient of rated ripple current minimum order quantity : 50pcs.
|
